What You'll Need:
• A metal tape measure (avoid fabric sewing tapes as they can stretch)
• Pen and paper
• The old glass panel (if available)
Prefer to watch a guide? Click the video above to see exactly how to measure.
Step-by-Step Measuring Guide
1. Preparation
Ensure the stove is completely cool.
If your old glass is intact, it is best to remove it and measure the glass itself.
To remove the glass, simply undo the clips or screws holding it in place and lift it out carefully.
If the glass is still fitted and removal is difficult, you can measure it while it’s still installed—just be extra precise as it may be slightly more fiddly.
Important: Many stove models have multiple versions, which means the glass size can vary. Measuring ensures you get the correct replacement.
2. Measure the Width
• Measure strictly horizontally from left to right.
• If you have the old glass: Measure the glass itself.
• If you are measuring the stove door opening: Measure the tight opening and deduct 1–3mm from the total width (3mm is safest).
This deduction is vital. Metal expands when hot; if the glass is tight against the metal, it can crack.
3. Measure the Height
• Measure strictly vertically from top to bottom.
• If you have the old glass: Measure the glass itself.
• If you are measuring the stove door opening: Measure the tight opening and deduct 1–3mm from the total height.
4. Measure the Thickness
• Check the thickness of the glass edge.
• Standard stove glass is usually 4mm, but some older models use 5mm.
• Tip: If you are unsure, 4mm fits into 99% of stove clips/seals.
5. Non-Standard Shapes (Cut Corners, Arched, Tapered)
If your glass is a standard square or rectangle, you can skip this step. For all other shapes, you can order directly online here: Order Cut to Size Stove Glass
Find your shape below to see which measurements you need to take.
Option A: Glass with Cut Corners (Chamfered)
If your glass has the top corners sliced off:
-
Measure the Overall Width & Overall Height of the panel.
-
Measure the Straight Side Height: The height running up the vertical straight side before the cut begins.
-
Measure the Top Width: The width across the flat top section (between the two angle cuts).
-
To Order: Select the "Cut Corners" shape on our website calculator.
Option B: Trapezium Glass (Tapered Sides)
If your glass looks like a pyramid with the top chopped off (narrower at the top than the bottom, or vice versa):
-
Measure the Top Width (across the very top edge).
-
Measure the Bottom Width (across the very bottom edge).
-
Measure the Vertical Height (straight down the center).
-
To Order: Select the "Trapezium" shape on our website calculator.
Option C: Sloping Top Glass
If your glass is rectangular at the bottom but has a diagonal top edge (one side is taller than the other):
-
Measure the Width (the full bottom width).
-
Measure the Short Side Height.
-
Measure the Tall Side Height.
-
To Order: Select the "Sloping Top" shape on our website calculator.
Option D: Arched, Half Arch, or Rounded Tops
For arched tops, half arches, or distinct curves, we cannot cut from simple measurements; we need to copy the exact curvature of your old glass using a template.
1. Order Online First
Go to the Cut to Size Page, select "Arched / Other", enter the maximum width and height, and complete your purchase.
2. Create a Template
Trace the outline of your old glass onto a piece of stiff cardboard or clean white paper.
3. Send it to us (2 Options)
-
Option 1: Post it (Recommended)
Write your Name and Order Number (e.g., SGR1234) on the template and post it to the address found on your order confirmation email. -
Option 2: Email a Scanned Copy
You can scan your paper template and email it to info@stoveglassreplacement.co.uk BUT it must meet these strict criteria:-
MUST be a 1:1 Scale Scan: It must be scanned using a document scanner at 100% (actual size).
-
NO Photos: We cannot work from photographs taken with a phone camera as the perspective distorts the shape.
-
Reference: Please put your Order Number in the email subject line.
-
We will cut the glass to match your template and return it within 2 working days of receiving a valid template.
Important Notes
✓ Precision matters: We recommend measuring in millimetres (mm) for the best fit, though our order form accepts cm and inches.
✓ Broken Glass? If your glass is in pieces, fit them together on a flat surface like a jigsaw puzzle to get overall width/height.
✓ Don’t measure the seal: Measure the space where the glass sits, not the old rope seal.
🛒 Ready to Order?
Once you have your measurements, enter them into our calculator to get an instant price: